RFID ve CAB Termal Transfer Yazıcı
  13.56 MHz
 

Frequencies

Three different bands can be used. Low-frequency range solutions with 125 KHz, high-frequency range with 13.56 MHz, ultra-high-frequency range solutions with 868 MHz (Europe) respectively 915 MHz (USA) determine read/write distances of the transponders. With 125 KHz only distances up to 0.5 m can be covered, with 13.56 MHz distances up to 1.5 m. 868/915 MHz reach up to 8 m coverage. The ability to read stored data can be constrained by metall and damp surfaces. In the ultra-high-frequency range no standardized frequencies are available world-wide. This means there are different use of each frequency in Europe, the U.S. and Asia.

  13.56 MHz
ISO Norm (ISO 15693) for high-frequency range 13.56 MHz applies worldwide.
This norm defines all read/write commands – therefore transponders
of most manufacturers (Infineon, Philips, Texas Instruments) can be used.
Most experiences regarding handling, production and utilization have been made with this frequency.
  868/915 MHz
For a short time there has been the ISO Norm 18000-6A/B for the ultrahigh-frequency range. The first read/write units have been introduced.
These units are still too large to install into printers. A disadvantage of this
  Important details about smart labels and the use of RFID transfer printers are provided in this datasheet. frequency are so-called “reading holes” which can be corrected by the use of multiple reading devices.
  Active transponders
An active transponder has its own power supply. The life span of the transponder is determined e.g. by the durability of the battery. These transponders are being employed in livestock husbandry, marking of domestic animals, in palettes and car anti-theft devices. The range for reading and writing data can cover several meters. High costs and the structural shape these transponders make them unsuitable for use in labels.
  Passive transponders
Smart labels use passive transponders. These transponders do not have its own power supply. The required electricity for reading and writing is being provided by the measuring device via electromagnetic coupling. The chip and antenna are situated in a carrier which can be placed in labels.
The memory capacity of the chips depend on manufacturer and frequency. Different sizes and shapes are available – basically the antenna defines both. Thereby varying distances for data transfer are being realised. Electrographic surfaces can shorten reading distances. Also of their thinness the labels are suited for the use in thermo transfer printers.
 

The printers A3, A4, A6 and A8 of the cab A-Series can be factory equipped with an RFID unit.

At the moment 13.56 MHz range is being supported.
For usage an activeX capable label software (e.g. cablabel Expert, Codesoft Enterprise, Easylabel Platinum) is required. This label software does not need to support RFID. The programm cabRFIDcontrol provides RFID support.The programm is free of charge and delivered with the printer. All printers can be used just like any regular label printer.
The data which is supposed to be written into the transponder can be entered via the input mask of cabRFIDcontrol. The data can also be provided by a database or external data file. In cabRFIDcontrol the label and the quantity of labels which should be printed can be selected.
Before the data is written on the transponder the ID (unique number of the transponder) is being verified. If this ID is given back to the software the writing procedure starts. After writing the data the content of the transponder is being checked automatically and the software starts the printing of the label.
With this solution all customers who work with label software can also work with transponder smart labels using 13,56 MHz frequency.
At the moment the PC needs to have two interfaces for connection – serial and parallel or Ethernet. A processor speed of 1 GHz is minimum.
     

Cab, RFid, Barkod yazici, Etiket aplikatörü, lazer markalama, Fiber optik lazer markalama, barkod, Thermal Transfer ribbons, termal transfer yazici, Barcode printers, Label applicator, Laser marking, Etiket, Service bureau, servis büro, etiket basma, scanner, termal transfer, laser yazici, lazer isaretleme, lazer kesim, fabric, Thermal transfer printers, ricoh, care labels, ink ribbon, printer ribbon, textile printers, textile labels, A3, A4, A4+, Mach4, E4, A6, A8, cab thermal transfer, yikama talimati, yikama etiketi, Fax Ribbons, otomasyon, automation